burkert2080電磁閥中文+英文版產品描述

burkert2080電磁閥英文版產品特點描述：

The valve consists of a pneumatically piston actuator with return spring, a stainless steel body and PTFE bellows. The PTFE bellows are used for the separation of the medium. With the appropriate installation (body to bottom) the valve is self-draining. The materials used and the internal contours are simple to clean (CIP and SIP). The valve is suitable for food technology. The modular structure permits con? guration with different armatures and customized port connectors. The pneumatic actuator is servo assisted by a pilot valve, a valve block or similar.

上海國與自動化設備有限公司專業提供銷售burkert2080系列產品

burkert2080電磁閥中文+英文版產品描述：

--高介質抗性
--良好的可清潔性，適合衛生應用領域
--高使用壽命
--簡單改裝控制功能 無流量時打開/關閉
--緊湊型
--不銹鋼執行器

1.  High Medium resistance
2.  Easy to clean for hygienic applications
3.  Long life
4.  Easy conversion of the actuator function, 
5.  normally open/closed
6.  Compact
7.  With stainless steel actuator

burkert2080電磁閥中文+英文版技術參數：

孔口：DN 10，DN6（FL法蘭），其他要求
執行器尺寸：直徑活塞。 28毫米
適用介質：中性到腐蝕性氣體和液體
中等壓力范圍：真空度可達8條
介質溫度：（見PT-圖）
端口連接：螺紋接口G 3/8，焊接端，F(xiàn)L法蘭連接
先導氣連接：螺紋接口G 1/8
位置檢測：Reedcontact（兩線接近），電纜長度：3米
安裝：直立組件自排空（體底部）
閥體材質：不銹鋼316TI（1.4571），與FL法蘭316L（1.4404）
執行器材質：不銹鋼304L（1.4301）
波紋管材質：PTFE*
材質：不銹鋼316TI / 316L，PTFE*
背壓：緊至8 bar
接地泄漏：5 NML /分，低于座椅空氣8巴測
先導空氣壓力：4.5?10巴
試點流體：中性氣體，空氣
環境溫度：zui高。 +90℃，

表面便可完成：表面便可完成為Ra = 0.8，其他要求
特殊功能：
  - 隨著自排操作
- 適用于CIP??和SIP（過程清潔）
- 適用于食品
- 符合美國FDA

Technical data
Ori? ce DN 10, DN6 (? ange), others on request
Actuator size piston diam. 28mm
Medium Neutral to aggressive
gases and liquids
Medium pressure range
Medium temperature
Vacuum up to 8 bar
(see PT-Diagram)
Port connections Threaded port G 3/8, weld end, ? ange connection
Pilot air connections Threaded port G 1/8
Position detection Reedcontact (two wire, closer), cable length: 3m
Installation Upright assembly for self-draining
(body to bottom)
Body material Stainless steel 316Ti (1.4571), with ? ange 316L (1.4404)
Actuator material Stainless steel 304L (1.4301)
Bellows material Advanced PTFE
Wetted materials Stainless steel 316Ti /316L, advanced PTFE
Back pressure Tight to 8 bar
Ground leakage 5 Nml/min, measured with air 8 bar below seat
Pilot air pressure 4.5 to 10 bar
Pilot ? uid Neutral gases, air
Ambient temperature Max. +90 °C
Surface ? nish Surface ? nish Ra=0.8, others on request
Special features - With self-draining operation
- Suitable for CIP and SIP (cleaning in process)
- Suitable for foodstuffs 
- FDA conform

Flow rate
Kv value water [m3/h]
Measured at +20°C, 1 bar Pressure at valve inlet and 
free outlet
Pressure values [bar] Overpressure with respect to atmospheric pressure
Flow direction (liquids) below seat (pressure on port connection 2)

burkert2080電磁閥中文+英文版產品描述：（訂貨表）

Ordering chart for valves (other versions on request)
All valves with pilot air ports G 1/8 and actuator body in stainless steel